See a 750×520 disposable plastic cup making machine tested with customer-made food container and lid molds, producing qualified products for project review.
# 750×520 Plastic Cup Making Machine Tested with Customer Food Container and Lid Molds
**Meta title:** 750×520 Plastic Cup Making Machine Mold Test | WEIXIN
**Meta description:** See a 750×520 disposable plastic cup making machine tested with customer-made food container and lid molds, producing qualified products for project review.
**Suggested URL slug:** `750x520-plastic-cup-making-machine-customer-mold-test`
**Primary keyword:** 750×520 plastic cup making machine mold test
**Secondary keywords:** disposable plastic cup making machine test, food container mold test, plastic lid mold test, customer mold thermoforming trial, qualified thermoformed products
A plastic cup making machine should be evaluated with the buyer's real product requirements, not only by its machine name or an empty-cycle demonstration. In this factory test, a **750×520 disposable plastic cup making machine** was used with **customer-made food container and lid molds**. The trial produced qualified products for the customer's project review.
The test is useful for buyers who need to confirm whether a cup thermoforming machine can work with customer-specific tooling. It also shows why machine selection, mold design and finished-product inspection should be discussed as one production task.
Watch the Customer Mold Test
The supplied video records the 750×520 plastic cup making machine working with the customer's food container and lid molds. It shows the practical production result rather than presenting the machine only as a standalone equipment unit.
<video controls preload="metadata" width="100%"> <source src="https://sc02.alicdn.com/kf/Ha1d75478c4f54a6295c05636c9988b0eg.mp4" type="video/mp4"> Your browser does not support the video tag. </video>
For a project buyer, a customer-mold test provides more useful evidence than a general machine video. The tooling, product shape and forming result are connected, so the buyer can review the actual application instead of relying only on a catalogue description.
What Was Tested?
The test covered the following confirmed scope:
- A disposable plastic cup making machine in a 750×520 configuration
- Food container molds made for the customer
- Lid molds made for the customer
- Production of qualified products during the trial
- Video evidence of the machine and mold testing process
The available test information does not define additional machine parameters, material type, sheet thickness, cycle speed, cavity quantity or measured output. Those points should be confirmed separately for each new project and should not be inferred from this video alone.
Why Customer-Made Molds Matter
The mold determines the product geometry that the machine must form. A food container and its lid may have different dimensions, depths, rim structures, draft angles and release requirements. Even when the same thermoforming machine is used, each tool must be checked against the intended product and forming process.
A customer-mold test helps evaluate practical points such as:
- Whether the mold fits the available machine working area
- Whether the sheet can reach the forming condition required by the product
- Whether the product releases from the mold correctly
- Whether the container and lid keep the intended shape
- Whether the formed products meet the customer's acceptance requirements
- Whether the machine and tooling can be considered together before shipment
The test does not replace a written technical agreement. Product dimensions, material, sheet specification, tooling details and acceptance criteria should still be confirmed before an order is finalized.
From Machine Selection to Qualified Products
A plastic cup making machine is not selected independently from the product. The correct direction starts with the finished container or lid and works backward through the sheet, mold and machine.
The project review normally connects four elements:
- **Finished product:** Confirm the food container or lid shape, size, weight and appearance requirements.
- **Thermoforming sheet:** Confirm the material, sheet thickness, width and feeding condition required by the product.
- **Customer mold:** Check the mold dimensions, cavity arrangement, forming depth, cooling and release direction.
- **Cup making machine:** Match the 750×520 machine configuration with the mold and the required production process.
When these elements are reviewed together, the buyer receives more useful evidence than a machine-only quotation. The production test can then focus on the product result that matters to the factory.
What Buyers Should Check in a Mold Trial
Before accepting a similar test, buyers should define how the product will be evaluated. The inspection should be based on the actual food container or lid requirements rather than a general statement that the machine has run.
Recommended review points include:
- Product dimensions against the approved drawing or sample
- Product shape and forming completeness
- Rim and sealing area condition where applicable
- Surface appearance and visible forming defects
- Product release from the mold
- Container and lid fit when the two parts are designed to work together
- Product weight and sheet usage when these are part of the specification
- Stability during a representative production run
- Tooling identification and delivery scope
The exact acceptance method should be agreed by the buyer and supplier. If the project requires measurements, the measurement tools, sampling quantity and tolerance should be written into the technical documents before the final test.
Food Container and Lid Production Applications
The tested tooling was made for a customer's food container and lid project. This type of application requires more than a formed shape. The container and lid may need to match in dimensions, fit, stacking direction and appearance so they can function as a packaging set.
A buyer planning a similar project should prepare:
- A physical product sample or technical drawing
- Container and lid dimensions
- Product material and target sheet specification
- Product weight requirement if applicable
- Required fit between container and lid
- Expected production quantity
- Mold layout and tooling requirements
- Destination-country and factory utility information
These details allow the machine and mold proposal to focus on the actual packaging product instead of a generic machine category.
Why a Real Test Reduces Purchasing Risk
A factory test cannot answer every question about a future production site, but it can reveal whether the proposed machine and customer tooling have produced the intended type of product under the recorded test conditions.
For overseas buyers, test evidence can support several decisions:
- Whether the machine direction is suitable for the product
- Whether the customer-made mold has been used in a production trial
- Whether the resulting products are qualified against the agreed review method
- Whether additional information is needed before shipment
- Whether the machine, mold and auxiliary equipment should be quoted as one project
The buyer should request the test conditions and product evidence together with the video. A short clip is most useful when it is linked to the product drawing, mold information and acceptance record.
Information Needed Before a Similar Quotation
To evaluate a 750×520 plastic cup making machine for a new container or lid project, send the following information:
- Product photo, sample or drawing.
- Product length, width, height or diameter.
- Container and lid matching requirements.
- Material type.
- Sheet thickness and sheet width.
- Product weight or tolerance requirements if available.
- Target output.
- Mold cavity and tooling requirements if already defined.
- Factory voltage and production-site conditions.
- Destination country or port.
After reviewing these details, WEIXIN Machinery can discuss the machine direction, customer mold requirements, test plan and project scope. Final machine parameters and acceptance conditions should be confirmed in the approved technical document.
Frequently Asked Questions
What machine was used in the video?
The video shows a 750×520 disposable plastic cup making machine used for a customer mold test.
What molds were tested?
Customer-made food container molds and lid molds were used in the trial.
Did the test produce qualified products?
Yes. The provided test description states that the machine produced qualified products for the customer project.
Does the video confirm the machine's full production capacity?
No. The video confirms the provided customer-mold test scope and qualified product result. Material, sheet thickness, cycle speed, cavity quantity and measured output require separate confirmation.
Can the same machine be used for other products?
Product suitability depends on the product dimensions, sheet specification, mold design and machine configuration. A new product should be reviewed with its own drawing or sample before quotation.
What should I send for a machine and mold recommendation?
Send the product drawing or sample, dimensions, material, sheet thickness, target output and any container-lid fit requirements. These details help match the machine and customer tooling to the intended production result.
Request a Customer Mold Test Plan
If you are planning food containers, lids or other thermoformed packaging products, send WEIXIN Machinery your product sample or drawing and the required sheet information. We can review the machine direction, customer-made mold requirements and test conditions before preparing a project quotation.
A real mold test gives the buyer a clearer basis for evaluating the production result. The final decision should combine the video, qualified samples, technical specifications, tooling information and written acceptance criteria.